OR Digital Clock — Temperature, Humidity & Time Display Panel
Flush-mount LED display showing time, date, temperature (±0.3°C) and humidity. Swiss Sensirion sensor, SD card logging, flush integration with OR wall systems.
OR Digital Clock — Key Features
A single display unit consolidates four critical OR environment parameters — eliminating the need for separate instruments and reducing wall clutter in sterile spaces.
Swiss Sensirion Temperature Sensor
Built-in Sensirion SHT-series sensor delivers temperature accuracy of ±0.3°C across the −9°C to 60°C operating range — the same sensing platform used in pharmaceutical and semiconductor cleanrooms.
Precision Humidity Measurement
Relative humidity measured across 0–100% RH with ±3% RH accuracy. Continuously displayed alongside temperature for real-time OR environment verification against ASHRAE 170 and HTM 03-01 targets.
Full Date & Time Display
Simultaneous display of year, month, day, hour, minute and second on high-contrast red LED digits. Visible from across the OR without secondary lighting adjustment.
SD Card Data Logging
On-board SD card slot records temperature and humidity data continuously — supporting environment compliance documentation, commissioning records, and infection control audits.
Flush-Mount Wall Integration
500 × 300 × 55 mm aluminum alloy frame with black acrylic front panel. Designed for recessed, flush installation within OR wall panel systems for a clean, seamless finish.
Remote & Button Control
Parameters including display brightness, date/time, and units (°C/°F) adjustable via push-button or infrared remote control — no access to wall internals required during operation.
Product Overview
The ICARELIFE OR Digital Clock is a flush-mounted LED environment monitor designed for installation in operating rooms, cleanrooms, and other critical healthcare spaces. It provides surgical teams and facility managers with continuous, at-a-glance visibility of four key environmental parameters: current time (HH:MM:SS), date (YYYY/MM/DD), room temperature, and relative humidity.
The unit is built around an aluminum alloy frame with a black acrylic front panel, measuring 500 × 300 × 55 mm. The display uses high-brightness red LED digit segments that remain clearly legible under full OR lighting conditions and across the full surgical suite. Temperature and humidity sensing is performed by a Swiss Sensirion integrated sensor — factory-calibrated to ±0.3°C and ±3% RH. Parameters are adjustable via push-button controls or an infrared remote, and an SD card slot enables continuous on-board data logging for compliance and audit purposes.
The panel is designed to integrate directly into ICARELIFE modular wall panel systems as a flush-embedded unit, eliminating surface protrusions and maintaining the seamless, hygienic wall finish required in surgical environments. It can also be configured for surface wall mounting or ceiling/suspended installation where panel integration is not required. Power is supplied via AC 220V with the cable routed through the top of the unit.
Technical Specifications
Specifications apply to the standard ICARELIFE OR Digital Clock. Custom display sizes are available on request.
| Parameter | Specification | Notes |
|---|---|---|
| Physical | ||
| Dimensions (W × H × D) | 500 × 300 × 55 mm | Custom sizes available |
| Frame Material | Aluminum alloy (anodized) | — |
| Front Panel | Black acrylic | — |
| Display Type | LED digit display (red) | High-contrast, OR-lighting compatible |
| Mounting Options | Flush-wall / Surface-wall / Ceiling-suspended | Specify at order stage |
| Temperature | ||
| Sensor | Swiss Sensirion (SHT-series) | Factory-calibrated |
| Measurement Range | −9°C to +60°C | Covers all healthcare environment targets |
| Accuracy | ±0.3°C | At 25°C reference |
| Display Unit | °C (switchable to °F) | Via remote/button |
| Humidity | ||
| Measurement Range | 0–100% RH | — |
| Accuracy | ±3% RH | At 25°C, 50% RH reference |
| Display Content | ||
| Time | Hours : Minutes : Seconds (24h) | — |
| Date | Year / Month / Day | — |
| Environment | Temperature + Relative Humidity (simultaneous) | — |
| Electrical | ||
| Power Supply | AC 220V / 50Hz | — |
| Power Consumption | ≤80W | — |
| Cable Outlet | Top of unit | 1.5 m cable included |
| Control & Data | ||
| Parameter Setting | Push-button / Infrared remote control | — |
| Data Logging | SD card (on-board slot) | Continuous T/RH logging |
| Alarm | None | Display only — no out-of-limit alert |
| Supply & Logistics | ||
| Lead Time | 20–30 working days (standard) | Custom sizes: +10 days |
| MOQ | 1 unit / project basis | — |
| Packing | Export-grade foam-lined carton | — |
| Warranty | 12 months from delivery | — |
OR Digital Clock Applications
Used across hospital infrastructure and life science facility projects in Southeast Asia, the Middle East, Europe, and South America — wherever controlled-environment spaces require continuous, visible environment display.
Operating Room
Provides surgical teams with real-time environment status for temperature and humidity targets per ASHRAE 170 (20–24°C, 20–60% RH).
Cleanroom
Supports ISO 14644 environment monitoring for classified spaces in pharmaceutical, electronics, and medical device manufacturing.
ICU & Isolation Room
Continuous environment visibility for intensive care and negative-pressure isolation environments requiring staff-accessible T/RH readouts.
Pharmacy & Sterile Compounding
Displays temperature and humidity for controlled compounding environments compliant with GMP EU Annex 1 and USP <797> requirements.
Laboratory
Suitable for regulated laboratory environments where ambient temperature and humidity affect test validity or equipment calibration.
CSSD / Sterile Services
Environment monitoring in central sterile supply departments where temperature and humidity influence sterilization process integrity.
Standards & Reference Guidelines
The ICARELIFE OR Digital Clock supports environment monitoring aligned with the following international standards and guidelines. The unit is a display device; compliance with environmental targets is achieved through the connected HVAC and AHU system.
Ventilation of Health Care Facilities
Defines OR temperature range (20–24°C) and relative humidity (20–60% RH). This panel provides staff-visible confirmation of compliance with these targets.
Cleanroom Classification & Monitoring
Temperature and humidity are monitored parameters in ISO-classified cleanrooms. SD card logging supports environmental monitoring records required under ISO 14644-2.
UK Ventilation in Healthcare (NHS)
UK NHS guidance specifying OR temperature (18–25°C) and humidity (40–60% RH) targets. Display enables continuous in-room staff verification.
Manufacture of Sterile Medicinal Products
Requires documented environmental monitoring in sterile manufacturing and pharmacy compounding areas. SD card data logging supports audit trail requirements.
Why Source from ICARELIFE
Contractors and consultants specify ICARELIFE for OR environment displays when they need pre-integrated, project-ready units supplied alongside the broader wall and ceiling system package.
Swiss Sensirion Sensing
The Sensirion SHT-series sensor used in this unit is the same platform trusted in pharmaceutical cleanrooms and medical device manufacturing worldwide. It delivers stable, factory-calibrated accuracy — not a generic off-the-shelf element. This is a verifiable differentiator for tender submissions.
Wall System Integration
Pre-dimensioned at 500 × 300 mm for direct flush integration into the ICARELIFE OR wall panel system. Supplied as part of the full wall package — no separate procurement, no dimensional mismatch on-site. Coordination drawings available on request.
Project Documentation Support
ICARELIFE provides datasheet packages, technical drawings, and specification letters to support project submissions and tender compliance — particularly for government hospital projects in Southeast Asia, the Middle East, and Africa.
Related Products
Commonly specified alongside the ICARELIFE OR Digital Clock on the same operating theater project.
ICARELIFE OR Wall Panel System
Modular HPL and stainless wall panels with integrated flush-mount positions for displays, outlets, and pass boxes. The primary host system for this display unit.
ICARELIFE OR Control Panel
Integrated operating room control system for medical gas outlets, lighting, and intercom. Specified alongside the environment display on the same wall panel section.
ICARELIFE Medical AHU
Modular air handling unit controlling the OR temperature and humidity that this panel displays. Designed for ASHRAE 170 and HTM 03-01 targets.
Related Guides & Articles
Frequently Asked Questions
The ICARELIFE OR Digital Clock is supplied by ICARELIFE (Shenzhen ICARELIFE Bio-Tech., Ltd.), a B2B medical infrastructure specialist based in Shenzhen, China. ICARELIFE supplies this unit as part of its complete operating theater equipment range to contractors, MEP engineers, and hospital project teams worldwide. All units are QC-inspected before shipment.
The display is designed to support environment monitoring aligned with ASHRAE 170 (operating room temperature 20–24°C, humidity 20–60% RH), ISO 14644-1/2 (cleanroom environment monitoring), HTM 03-01 (UK NHS OR ventilation targets), and GMP EU Annex 1 (sterile manufacturing environment documentation). The unit itself is a display device — OR environmental compliance is achieved through the connected HVAC/AHU system.
Standard lead time is 20–30 working days from order confirmation and deposit. ICARELIFE accepts single-unit orders on a project basis — there is no fixed MOQ. Custom display sizes add approximately 10 working days. Contact the sales team for project-specific scheduling and batch delivery coordination.
No. The standard ICARELIFE OR Digital Clock is a display-only unit — it shows current temperature, humidity, date, and time, but does not include an audible or visual alarm when values exceed set thresholds. If an alarm function is required, this should be handled by the building management system (BMS) or a dedicated environment monitoring system connected to the AHU or room controller. Contact the sales team if alarm-enabled variants are needed for your project.
Yes. ICARELIFE provides a documentation package including product datasheet, technical specification letter, sensor calibration reference (Sensirion), dimensional drawing, and installation notes. These are available on request for project tender submission, engineer approval, and procurement packages. Submit your request via the enquiry form or contact the sales team directly.
Source the OR Digital Clock for Your Project
ICARELIFE works directly with contractors and consultants. Submit your project requirements to receive a technical quotation, datasheet, and compliance documentation.
