Case Study — Guangzhou, China
Corian Surgical Sink Installation at Sun Yat-sen University Seventh Affiliated Hospital
How a seamless Corian solid surface scrub station was specified and installed to close infection-control gaps in a pre-operative wash zone.
Quick Answer
- ICARELIFE supplied and installed a Corian solid surface surgical sink system for the pre-operative scrub zone.
- The monolithic, seamless design removes joints and crevices where bacteria typically accumulate.
- Touchless sensor taps were integrated to reduce contact points during scrub-in procedures.
- The project was delivered in coordination with the hospital's facility management team.
Project Overview
The Seventh Affiliated Hospital of Sun Yat-sen University required a scrub sink system that met stricter hygiene standards than a standard stainless steel installation could offer.
Completed scrub station using seamless Corian solid surface, installed by ICARELIFE.
The pre-operative scrub zone is a high-frequency contact area, used continuously by surgical teams throughout the day. Any joints, seams, or porous surfaces in this zone increase the risk of bacterial retention. ICARELIFE was engaged to supply a Corian solid surface surgical sink system designed to remove these failure points.
Non-Porous Surface
Corian does not support bacterial or mold growth, meeting sterile-zone requirements.
Seamless Construction
Monolithic basin-to-counter forming removes crevices where pathogens accumulate.
Chemical Resistance
Withstands repeated exposure to hospital-grade disinfectants without surface degradation.
Touchless Operation
Sensor-activated taps reduce hand-contact points during the scrub-in sequence.
Why Corian for Surgical Scrub Stations
Traditional stainless steel sinks rely on welded seams, which can degrade over years of heavy cleaning cycles. Corian solid surface is thermoformed into a single continuous basin, eliminating this failure mode entirely.
| Attribute | Stainless Steel | Corian Solid Surface |
|---|---|---|
| Seam integrity | Welded joints, can degrade over time | Monolithic, no joints |
| Surface porosity | Non-porous, but scratch-prone | Non-porous and self-repairable |
| Chemical resistance | Good, but seams remain a risk point | Uniform resistance across the full surface |
| Visual integration | Utilitarian appearance | Custom-molded, consistent finish |
Specification & Design Detail
Scope Delivered
ICARELIFE coordinated directly with the hospital's facility management team to match the sink configuration to existing scrub room dimensions and staff throughput requirements.
Multi-station configuration supporting simultaneous surgical team scrub-in.
-
Multi-station basin layout
Triple-station configuration to support simultaneous scrub-in by multiple surgical staff.
-
Custom basin depth calibration
Splash-controlled basin depth to limit water contact outside the wash zone.
-
Touchless sensor tap integration
Wall-mounted sensor taps installed to remove manual valve contact during scrub-in.
Touchless sensor taps reduce cross-contact points in the pre-operative zone.
Project Outcome
The completed installation gives the hospital's surgical staff a scrub station built around infection-control priorities rather than standard fixture specifications. The absence of seams and manual contact points directly supports the facility's sterile-zone protocols.
"The seamless surface and touchless taps give surgical staff a cleaner, more consistent scrub-in process."
— Roger LEE, Co-Founder & Director, ICARELIFE
Solid Surface Sink Specification Guide
Full technical data sheet covering Corian basin dimensions, tap compatibility, and mounting requirements.
Frequently Asked Questions
Yes. Corian is non-porous and resistant to hospital-grade disinfectants, making it suitable for scrub stations used continuously throughout the day.
Yes. Basin count, spacing, and depth are configured to match room dimensions and expected staff throughput, as demonstrated in the triple-station layout used in this project.
Yes. Touchless sensor taps are supplied and integrated as part of the complete scrub station package, coordinated with facility management during installation.
ICARELIFE — Case Studies
Specifying scrub stations for a hospital project?
ICARELIFE supplies solid surface surgical sinks as part of complete modular OR and CSSD infrastructure packages, coordinated with contractors and facility teams from specification through installation.
